Fiberglass Battery Separator Tissue for Lead-Acid Battery Separator

Fiberglass Battery Separator Tissue for Lead-Acid Battery Separator

Battery separator tissue is produced with glass fiber and features high area weight, low DC mass resistivity, high absorption capacity, good acid resistance, low content of deoxidized KM-nO4 organic substance and low impurity as well as proper stiffness, smooth surface...

product details

Our company's independent research and development Reinforced Fiberglass Tissue, Brown Polyester Mat, Fiberglass Surface Tissue have attracted much attention and praise all over the world. The products are exported to many countries and regions and are deeply loved by consumers at home and abroad. Give us a chance, give you a surprise. Therefore, we will make unremitting efforts to abide by the tenet of perseverance and honesty. We believe that the company's stable economic growth needs to rely on the adoption of new technology and equipment and the improvement of labor culture and technology.

Battery Separator Tissue
Battery separator tissue is produced with glass fiber and features high area weight, low DC mass resistivity, high absorption capacity, good acid resistance, low content of deoxidized KM-nO4 organic substance and low impurity as well as proper stiffness, smooth surface and uniform thickness. Using this fiberglass tissue as the separator, the compound lead acid battery has the advantages of low resistivity, high porosity and large capacity, better mechanical strength and vibration resistance. The battery fixed up with this type of separator plates has stronger starting power and longer service lifetime, therefore it has become a trend to replace the traditional battery separator plate with this fiberglass one.


Technical Data  


Item

Unite

Specification



S-BT0.3

S-BT0.4

S-BT0.5

S-BT0.6

Thickness

mm

0.3±0.03

0.4±0.03

0.5±0.04

0.6±0.04

Binder Content

%

<20




Tensile Strength MD

N/5cm

≥60

≥80

≥100

≥120

Acid resistance in 15 minutes

%

≤2




Acid resistance in 72 hours

%

≤3




Thickness Variation

%

≤5




Wet Out

S

≤100

≤25

≤10

≤10

Original State Content of KMnO4 C(1/5KMnO4)=0.01/L

ml/g

≤15




CL Content

%

≤0.003




Fe Content

%

≤0.005




Mn Content

%

≤0.003




Roll Width

mm

1000±5





Customization  

Above technical dates are standard for our company. Of course we can produce as per your requirement . First , tell us your requirement or where you will use the products, then we will make samples and send you by courier. Please comment on /confirm the samples we send. We will try out best to satisfy you need.

 

The advantage of our pasting paper is better water absorption, high acid resistance, high mechanical strength and good chemical stability. Comparing cellulose pasting paper our pasting paper will not dissolved in acid, no gas will decomposed from the paper. The compression inside battery plate is stable, which guarantees high-rate discharge and long cycle life of VRLA battery.  

For the battery manufacturer if continuous grid pasting technology be used, the pasting paper should be applied. The application of pasting paper is to make the electrolyte distribute uniformly, enhanced strength of the plate, preventing the dropping of lead paste which may bring environment pollution, avoid the connection between plate and the equipment. The pasting paper can also be used as the separator of spirally wind lead fabric grid battery.


Characteristics 

High area weight

Low DC mass resistivity

High absorption capacity

Good acid resistance

Low content of deoxidized KM-nO4 organic substance

Low impurity

Proper stiffness

Smooth surface

Uniform thickness


Application

1 25


Delivery:

Mat will be loaded into container in factory, then be delivered to the sea port, finally be shipped to customers port by ships/vessels. Commonly we assure you we can make delivery two weeks on getting your confirmed order. 

4


Our services:

We are factory majored in fiberglass/poly fiber since 2006, having much experiences in this line. You can trust us for our good service, profession, prompt delivery and best price. We can offer any help any time. If you have any question /need, please contact us. 


Look at goods under production. We have 8 production lines for this item which can make sure delivery on time.

3



To constantly improve the management system by virtue of the rule of 'sincerely, good faith and quality are the base of enterprise development', we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for Fiberglass Battery Separator Tissue for Lead-Acid Battery Separator. In order to carry out our goal of 'customer first and mutual benefit' in the cooperation, we establish a professional engineering team and a sales team to supply the best service to satisfy our customers' requirements. After many years of market test, our products are all over the large and medium-sized cities and are very popular.

Previous: Fiberglass Pipe Wrapping Tissue

Next: Fiberglass Tissue Used for Carpet Tiles

Inquiry

You Might Also Like