PTFE Coated Fiberglass Fabrics PTFE Tape

Dry Wall Fiberglass joint tape 

Drywall joint tape is made of fiberglass 
It’s the most ideal material for cracks repairing on the drywall, and joints strengthening on the ceilings, gypsum boards, etc.
Comparing to the paper tape which is widely used on the market, it’s much easier to use, no bubbles or blisters, and can be
applied directly to the wall surface without pre-embedding required. Its tensile strength is up to 400N/50mm which is much stronger than paper tape. Furthermore, it’s non-organic, mold-resistant, long durability, which prevents the possible break that
happens to paper tape after 3-5 years.

This fiberglass joint tape has becoming very popular in construction and decoration for many years.

Re width and length, we can produce as per your requirement..We wl make the fiberglass dry wall tape white, blue, yellow and different width according to your requirement.

Technical Data:

Matt Density: Random

Tape Identification: Pale yellow color or white

Moisture Content: 0.5%

Characteristics:

Water resistance,flexibility,softness

Resistance to aging and attack from breakdown

Crack resistance, alkali resistance

With good cohesion

Easy to be operated

Customization: 

Above technical dates are standard for our company. Of course we can produce as per your requirement . First , tell us your requirement or where you will use the products, then we will make samples and send you by courier. Please comment on /confirm the samples we send. We will try out best to satisfy you need. And of course our fibre glass price is reasonable.

Tips to apply:

Repair cracks, patch holes drywall finishing-fast

Wall must be clear and dry.

Center and apply tape over the length of the joint and pressing firmly

Apply a generous first coat of compound over the tape , making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape

Let dry completely, then sand slightly

Apply sufficient thin finishing coats to produce a smooth wall surface

Special care must be taken to assure proper compound penetration of all joints.

This may result in slight build-up of compound that will require and increased amount of edge feathering.

Packing ,Loading and Delivery:

Mat will be loaded into container in factory, then be delivered to the sea port, finally be shipped to customers port by ships/vessels. Commonly we assure you we can make delivery two weeks on getting your confirmed order.

Our services:

We are fiberglass factory majored in fiberglass/poly fiber since 2006, having much experiences in this line. You can trust us for our good service, profession, prompt delivery and best price. We can offer any help any time. If you have any question /need, please contact us.