Ceramic Fiber Mat for Automotive Emission System

TLF-500TM Products Of RCF Fiber PRODUCT DESCRIPTION TLF500TM series product Is an auxiliary expansion liner. It can provide support by the fiber at low temperatures. In the high-temperature environment, the carrier is provided with sufficient support by auxiliary expanded vermiculite. Compared...

product details

TLF-500TM Products Of RCF Fiber


PRODUCT DESCRIPTION

 TLF500TM series product Is an auxiliary expansion liner. It can provide support by the fiber at low temperatures. In the high-temperature environment, the carrier is provided with sufficient support by auxiliary expanded vermiculite. Compared with conventional expansion liner, it has more balanced support, better anti-corrosion ability, stronger corrosion resistance, and more stable application.

   It is made of RCF fiber, organic binder, vermiculite and it will optimize formula structure according to application conditions.

  TLF500TM  can provide the required pressure at relatively low packaging density, and after long-term use still has sufficient support, corrosion resistance. Fuel, engine exhaust, salt spray, acid, urea, and so on, and belongs to non-hydrophilic products

   It can meet the needs of most steam of gasoline/ diesel emission system packaging carriers and adapt to the packaging of different size carriers, especially for the ternary catalytic carrier packaging of diesel engine exhaust gas treatment.


1623208749(1)













CHARACTERISTICS  

Low density, sufficient support

Excellent support during low/high temperature

Good flexibility, not easy to crack

Good anti-erosion properties as non-expansive products'  

Non-hydrophilic products, anti-acid, anti-urea, anti-corrosion

A wide range of applications, good packaging, excellent comprehensive performance of high-end expansion products.



TECHNICAL DATA                

Item

TLF-500-2600

TLF-500-3200

TLF-500-3900

Loss on ignition(LOI)

5-12%

5-12%

5-12%

Natural thickness(mm)

9.6

11.9

14.4

Application gap(mm)

4.3

5.3

6.3

Classified temperature (℃)

1260

1260

1260

Temperature limit (℃)

950

950

950

Initial expansion temperature(℃)

≤500

≤500

≤500

Basis weight(g/m2)

2600

3200

3900

Bending radius(mm)

<40

<40

<50

Tensile strength (Kpa)

≥50

≥50

≥50

Thermal [email protected] temperature W/(M*K)

< 0.04

< 0.04

< 0.04

@400℃

<0.12

<0.12

<0.12

@800℃

<0.2

<0.2

<0.2

Remark: 1. The technical data above is for reference only

2. Any special size can also be supplied according to customers' request


1623208778(1)1623208849(1)


CHEMICAL COMPOSITION

ceramic fiber         60-75%

vermiculite            25-35%

Binder                    4-10%


 

SPECIFICATIONS OF THE PRODUCTS

Type                        TLF-500-2600      TLF-500-3200       TLF-500-3900

Basis weight (g/m2)     2600                3200                     3900

Thickness ( mm)           9.6                   11.9                      14.4    (thickness measured at 0.725kpa pressure)

Fiber index (%)             〉80                 〉80                     〉80       


 

PACKING

Every roll in plastic film, 115rolls per 40’HQ

 

STORAGE

This product should be stored in a dry, ventilated and rainproof place, with temperatures from 5℃to 35℃ and humidity between 35% and 65%. It is recommended to be kept in the intact package when not used to avoid damp. 

1623210647(1)





Hot Tags: Ceramic Fiber Mat for Automotive Emission System, China, manufacturers, suppliers, factory, Rerced Tissue For Sports Floor, fiberglass acoustic panels, paver base mat, Fiberglass Insulation, fibreglass flat wall, non woven polyester mat

Previous: No Information

Next: Ceramic Fiber Mat for Automotive Thermal Insulation

Inquiry

You Might Also Like