Fiberglass Panel

Fiberglass Panel is made of fiberglass chopped strands by the wet layout process. Fiberglass panel has the features of heat preservation, heat insulation, acoustic absorption, and fire-proofing. The fiberglass panel is laminated with glass fiber with a special process, making the...

product details

Product Description

Fiberglass Panel is made of fiberglass chopped strands by the wet layout process. 

Fiberglass panel has the features of heat preservation, heat insulation, acoustic absorption, and fire-proofing. The fiberglass panel is laminated with glass fiber through a special process, making the finished products look like a panel. All these features make the fiberglass felt an ideal material to decrease the loss of heat, improve the acoustic environment and keep the building safe from fire. The fiberglass panel is especially suitable for the wall and ceiling decoration of star-rated hotels, or office buildings where a quiet environment is required.


fiberglass boardsfiberglass board

Characteristics

1) Machine continuously made flat panels, no limit on length;
2) Anti-impact: much better stiffness and strength than plastic, due to fiberglass reinforced;
3) Fire resistant: made by thermosetting resin;
4) Mildew resistant: Effectively inhibits the growth of mildew;
5) Easy install: No other tools are needed except for rivet or glue only;
6) Anti-corrosive: stay in good condition immersed in 10% Hydrochloric acid or 3% NaOH solvent for a long time;
7) Easy cleaning: It can be easily cleaned by steam or a high-pressure squirt gun;
8) Extreme temperature resistance: Withstand temperature at -40 -110 degrees C for a long time;
9) Rolled up by machine with 50-100m length as a coil, to save shipping cost.


Application

external wind tube, Ceiling, Sound absorption board, and wallcovering.

 

Specification

0.5mm, 1mm, 2mm, 3mm.


Delivery

The product will be loaded into a container in the factory. Then be delivered to the seaport, and finally shipped to the Customers' port by MSK, MSC, CMA, COSCO, YANG MING, APL,  etc.

 

1612678122(1)1612493357(1)

                                            

Storage

This product should be stored in a dry, ventilated and rainproof place, with temperatures from 5℃to 35℃ and humidity between 35% and 65%. It is recommended to be kept in a safe package when not used to avoid dampness.        

                                                 

Customization

The product in the above table is the standard type Nanjing EFG CO., LTD is delivering to customers. If the customer wants it in specific unit weight, tensile strength, roll width, and roll length, Nanjing EFG CO., LTD can produce fiberglass mat as per the customer’s requirement, and offer tailored service to customers from different countries.  


Payment

LC, T/T, CAD, PAYPAL, WESTERN UNION, ETC.


Our Services 

Nanjing EFG CO., LTD tracks the cargo of every shipment till the customer uses the fiberglass mat, and offers any help for the customer’s demand at any time.

If the customer meets any problem with technic, Nanjing EFG CO., LTD will supply relative knowledge to help the customer find the best solution, and can send a technician to the customer's factory for guidance if necessary. 


Previous: Reinforced Fiberglass Mat

Next: No Information

Inquiry

You Might Also Like