Fiberglass Adhesive Tape

Fiberglass adhesive tape has a mesh structure and uniformly applied adhesive system. Fiberglass adhesive tape is easy to attach to any surface, and allows high-quality and fast operation even for non-professionals. We can cut off a piece of fiberglass adhesive tape from a roll to the required length, and paste it on the seam, just press it.

product details

Product description

Fiberglass adhesive tape has a mesh structure and uniformly applied adhesive system. Fiberglass adhesive tape is easy to attach to any surface, and allows high-quality and fast operation even for non-professionals. We can cut off a piece of fiberglass adhesive tape from a roll to the required length, and paste it on the seam, just press it.

 

The special fiberglass adhesive tape is used to prevent the formation of cracks and surface hardening. It is used for gluing joints, corners, ceilings, glue joints, and places of contiguity.

 

fiberglass mesh tape 1fiberglass mesh 5


Application

The junction of gypsum board, particleboard, hardboard, and other sheet materials;

Gluing joints between the door and window frames to the walls;

Sizing of cracks, corners, and joints in concrete, and plaster surfaces;

For continuous reinforcement of walls and ceilings.

Note: before applying adhesive to prepare the surface. Surface preparation is to clean it from dust and dirt. If there is a need to make sanding.

 

application 5_application 6 (2)


Characteristic

A:    Increases the strength of coatings, resistance to alkalis, does not rust, is not subject to decay, and prevents cracking.

B:    High-quality adhesive composition;

C:    Compatible with all types of fillers and plasters;

D:    Take on the burden associated with the constant changes in temperature and humidity ;


Specifications

The density of glass is 60g/m2;

Length 40, 45, 50, 90, 100m

Width: 40, 45, 50, 100, 200mm

The content of the impregnating material, not less than 10% by weight

In peel strength, on a wooden surface: at least 2500 N/m


Storage conditions 

enclosed dry storage facilities 


Packing

Each roll is packed in shrink-wrap, then put into a cardboard box.

41612678122(1)


Hot Tags: Fiberglass Adhesive Tape, China, manufacturers, suppliers, factory, fiber mesh for gypsum plaster, fiber polyester, fibreglass flat wall, fiberglass over pvc board, fiber batt insulation, insulation wrape tape

Previous: Non-stick Fiberglass Joint Tape

Next: Fiberglass Seam Tape

Inquiry

You Might Also Like