EPDM Outdoor Flooring Playground Rubber Mat

EPDM Outdoor Flooring Playground Rubber Mat

Polyester Fiberglass Paving Mat ◆ Delays reflective crack ing ◆ Provides a Moisture Barrier ◆ E asy installation ◆ Fully Millable and Recyclable ◆ Low risk of product shrinkage during the overlay process Polyester Fiberglass Paving Mat is produced from the mixture of polyester fiber and glass...

product details

Our company strives to establish the corporate image with first-class product quality of the fiber sheet for flooring, patio paver mats, aluminuim foil roll and business reputation. We insist on promoting the core competitiveness of enterprises with corporate culture, so as to establish a good social image in the development of enterprises. We develop the market with the principle of small profit and quick turnover, high quality service and flexible business model. With the support of new and old customers, our products have been sold well in domestic and foreign markets.

Polyester Fiberglass Paving Mat

图片14.gif 

◆ Delays reflective cracking 


◆ Provides a Moisture Barrier


◆ Easy installation 


◆ Fully Millable and Recyclable


◆ Low risk of product shrinkage during the overlay process


Polyester Fiberglass Paving Mat is produced from the mixture of polyester fiber and glass fiber by wet lay-out process. The combination of glass fiber and polyester fiber is the key to understand its performance. After mixing the two fibers together, this composite mat keeps good features of both fibers and minimizes shortcomings of both fibers.


Strong tensile strength make polyester fiberglass paving mat extends the life of pavement through the delay of reflective cracking. Polyester fiberglass paving mat also serves as an effective moisture barrier. The unique, non-woven, polyester-fiberglass structure of the mat allows asphalt binder to fully penetrate and fill voids within the mat, limiting moisture infiltration and preventing water from infiltrating into the granular layers of the pavement structure. 


Polyester-Fiberglass Paving Mat creates innovative solutions to help the paving projects to go smoothly and provides superior performance at airport runway, super highway, parking area and business lots.

1602556162(1)


Product Code: PF130-800


Nature

Units

Typical

Area Weight

G/m2

130-150

Tensile Strength MD

KN/m2

8

Tensile Strength CD

KN/m2

8

Polyester fiber content

%

20-40

Glassfiber content

%

50-70

Binder content

%

15-25

Thickness

mm

≤1.2

Melting point

230

Asphalt absorption capacity

L/m2

1.11

Elongation MD

%

<5

Elongation CMD

%

<5 


Instruction to use the polyester fiberglass paving mat: 

◆ Remove dirt, gravel and dust from the pavement to assure good adhesion between asphalt and pavement. 

◆ If the road is damaged, the road must be repaired to make the surface of the road hard and smooth. 

◆ For a good result, the asphalt that will be used to adhere this composite mat with the road must be hot asphalt, but not emulsified asphalt. 

◆ The temperature of hot asphalt should be between 163℃ and 204 ℃. 

◆ When the hot asphalt covered the road, the polyester fiberglass mat must be overlaid onto the hot asphalt before the asphalt loses it’s mobility so as to ensure the mat fully soaked by asphalt and effectively provides a moisture barrier.  

◆ On installation of the Polyester fiberglass paving mat, the air temperature must be higher than 4 ℃. 


In order to achieve optimal results, here we provide some Important Notes on installation of Composite Paving Mat: 

◆ Polyester fiberglass paving mat must be installed on the hot asphalt. We recommend the following asphalt. AC-20; PG64-22; AR8000 +, or asphalt with penetrate rates 60-80. In extremely hot summer, we recommend to use the asphalt with high viscosity, such as AC-30; PG67-22; AR8000 +, or asphalt with penetrate grade 40-60. 


◆The best ratio of asphalt is 1.1 liters / square meters paving mat, but subject to project site situation during the installation, the ratio can be between 1.0-1.3 liters / square meters. According to different area weight of the Composite Paving Mat, the ratio of asphalt should be adjusted accordingly. During the asphalt delivery, we do not recommend to heat the asphalt above to a temperature higher than 204 ℃, because this would hinder the pre-mature of liquid asphalt.


◆ Handle the polyester fiberglass paving mat with care during the installation, the paving mat might be damaged or it may cause bad result if the paving mat drops from the installation machine.


◆During the installation, if it forms a stripe bigger than 2.5cm in any direction, the stripes must be cut and overlaid, and the two layers of paving mat must be fully covered by asphalt so as to assure the two layers of paving mat fully soaked in the hot asphalt. Use roller to press the paving mat or use brush to clear out bubbles in the paving mat to ensure the paving mat fully adhered to the road. When covering the hot asphalt to the road, the width of asphalt should be 4 inch more than the width of paving mat. Since the paving mat can not be curved, for the winding area of the road the paving mat can be cut into several pieces and be installed to the road manually or mechanically.  


◆For the connection of two pieces of paving mat: the two pieces of paving mat must be overlapped together. In the longitudinal direction the overlapped area must be at least 10.2cm; and in the lateral direction, the overlapped area must be at lease 5.1cm.


◆If the installation machine or other vehicles have to drive on the paving mat, it should not turn directions frequently or suddenly so as to avoid damaging the paving mat. Do not scatter sand or other object on the paving mat; to avoid asphalt sticking to the tire of the machine, do not minimize the ratio of bitumen. 

21605231745(1)


Customization  

Above technical dates are standard for our company. Of course we can produce as per your requirement .First , tell us your requirement or where you will use the products, then we will make samples and send you by courier. Please comment on /confirm the samples we send. We will try out best to satisfy you need. We have been in this lien for about twenty years and we are confident in fiberglass fabric , and surely we can provide you with good quality,best service. If you don't find products you want , pls also contact us, just tell us what you need, and we can see what we can do for you.



Packing ,Loading and Delivery:

Mat will be loaded into container in factory, then be delivered to the sea port, finally be shipped to customers port by ships/vessels. Commonly we assure you we can make delivery two weeks on getting your confirmed order.


1612341553(1)







Relying on the enterprise spirit of 'technical innovation, winning by quality' and the work style of 'paying attention to details and striving for perfection', we continue to innovate and strive to become one of the most important suppliers in the EPDM Outdoor Flooring Playground Rubber Mat field. Quality is life and brand brings benefits. Our company establishes brand strategy to meet the challenge of international market competition. We sincerely hope to establish good cooperative relationships with our new and old business partners from all parts of the world.

Previous: Glass Geogrid Composite Paving Mat for Asphalt Pavement Anti-Cracks Mositure Barrier Stress Relief

Next: Grid/Paving/Drainage Mat/Grass/Turf Protector

Inquiry

You Might Also Like